LiFePO4 (Lithium Iron Phosphate) Marine Batteries

Discover top-quality LiFePO4 marine batteries at Custom Marine Products. Our advanced lithium iron phosphate batteries offer superior performance, reliability, and longevity for marine and RV applications. Perfect for boating and off-grid adventures, these batteries provide high energy density, fast charging, and long cycle life. Explore our range and power your adventures with the best in lithium technology. Shop now for unmatched quality and support from industry experts.

Advantages of Custom Marine Products batteries:

  • Bluetooth to your phone for an abundance of data including charge/discharge rates, state of charge, cell health, and more.
  • Very high continuous power draw, 150 amps up to 150 ah and 200 amps for our 240 ah and above batteries.  These go to 300/400 amps respectively for up to ten seconds. This means a single battery bank can be used to start your engine, run your thrusters, winches, and meet all your power needs.
  • High end lifepo4 cells and high end BMS (battery management system)
  • Available with replaceable BMS - good for long ocean crossings or if you are far from port.

CMPower LiFePO4 (Lithium Iron Phosphate) Marine Battery Grid

Victron LiFePO4 (Lithium Iron Phosphate) Marine Battery Grid

13 products

Frequently Asked Questions

Why use Lithium batteries for a trolling motor?

Lithium (LiFePo4) batteries are perfect for trolling motors because they offer high capacity storage per pound (nearly 4x), consistently high power at same voltage (means higher operating efficiency), much longer lifespan (up to 10x and more), less weight (half), longer shelf life and rapid efficient charging (20% more efficient), availability of 95% of rated battery amperage instead of 50-60% available in lead acid. Some even offer a bluetooth app to your phone so you can see exactly how much power you have left at any time.

What are the major components of a LiFePO4 battery?

A LiFePO4 battery has two primary components, the LiFePO (lithium iron phosphate) cells and the Battery Management System (BMS). Both are inside a sealed battery case. The quality of the cells and BMS are key to the longevity and performance of the battery. LiFePO cells are wired in parallel to form a single module producing 3.2 volts. Four of these modules are connected in series to form a rated 12.8 volt LiFePO4 battery; eight for a 25.6 (24) volt battery. The temperature, charge and discharge of each cell is monitored and actively managed by the BMS, a computer built into each battery. In addition to cell monitoring and management, the BMS will prevent over-discharging of cells by disconnecting the load and will prevent cell over-charging by reducing charge current or stopping the charge process. The BMS will also shut down the system if the battery temperature is out of range and wait for it to come down before continuing to charge.

Are lithium batteries good for trolling motors?

Absolutely. They are half the weight with twice the power. Easy to take on and off the boat to charge, or charge them with solar where they are about 20% more efficient at charging than lead acid. They run at a consistent voltage most of the way through their charge cycle which means more efficient motor operation. They have almost four times more amperage per pound meaning less batteries are needed. Ours comes with a bluetooth app so you can check how much charge you have on your phone at any time - lessens the chance of being stranded on the water. Can run as both a starter battery and a trolling motor battery. Can be used to run all your components including power pole, GPS, fish finder, live well, charge your phone.

Can I use a single lithium battery for starting and everything else on my fishing boat?

Yes for sure, we have customers who run their entire boats with a single lithium battery. It is very efficient in terms of weight, space, charging speed and cost. An excellent solution for skiffs, bass boats, flats boats, jon boats with trolling motors, power poles, live wells, and so on.

What if my controller does not have settings for lithium batteries?

If a LiFePO4 or lithium setting is not available on your controller, use the 'USER' function to program and set the following parameters: Absorption voltage: 14.4 volts (acceptable range is 14.2 to 14.6 volts) Absorption Time: The recommended setting is half an hour per 100ah of LiFePO4 battery (for example: for 2 -100ah batteries select 1 hour). Float Voltage: 13.5 volts (13.6 volts or lower is acceptable for LiFePO4 batteries although float is not necessary) Equalization voltage: Do not equalize LiFePO4, turn off the equalize function, but in case it ever runs a cycle or equalization can’t be turned off set to 13.4 volts. Temperature Compensation: LiFePO4 batteries do not need temperature compensation. Low Temperature cut-off: -5 degrees C, 20 degrees F

Our CMPower 2.0 Smartphone App

What our Smartphone App Shows You.

Battery State of Charge %
Battery Voltage
Battery Amp Hours Remaining
Status: Standby, Charging. Discharging.
Condition: Perfect, Very Good, Good, Fair. Poor
Fault Codes: Over Voltage, Over Amp.
Number of Charge Cycles
Battery Temperature
Battery Cell Group Voltages
Time to Fully Charged

Solar System Design and Installation

We have put together a collection of helpful information for our customers on everything to help you design you perfect system and installation instructions.

Premium Marine Solar Panels/Systems and Lithium Iron Batteries

Improve your cruising experience with the highest efficiency solar panels available. 

Popular Collections

What Our Customers Have To Say

  • Doug Heath - Santa Fe, NM

    Customer Service and Product

    Very pleased with the performance of the rigid solar panels purchased in 2022. Customer service also has been consistently excellent both before the sale regarding product selection and after the sale regarding installation and maintenance concerns.

  • William Roth - Kodiak, AK

    Heavy Duty Panels For The Win

    Installed 1200watts of panels on my 56' commercial fishing boat in Kodiak Alaska, with salt spray and harsh winters I hardly run my genset. Installation was a breeze with using silicone to mount them. Most the boats in my family fleet have them now and we are all saving big on the fuel bill! Couldn't be happier with the purchace.

  • Hartwell C - Bellingham, WA

    Easy Install - Great Performance

    I worked with Tom last year to design a system for my sailboat; the dialog and information was very detailed and helpful in helping determine my system needs and completing the installation. Once ordering, the kit arrived in a timely manner and very complete. The install was very straightforward and Tom provided additional information as needed. After the install I took off on a 7 month cruise of British Columbia. The system worked perfectly during my trip. I’m very happy with the equipment and support from CMP and Tom. I highly recommend !

Shade Tolerant Flexible Solar Panels Explained